Microbiology FDA 483 (Zydus Lifesciences): Procedures to prevent microbiological contamination are not followed

Observation

Procedures designed to prevent microbiological contamination of drug products purporting to be sterile are not followed

Facility Type

Sterile Manufacturing

Firm / Company

Zydus Lifesciences Ltd.

System

Details

Procedure 0317-SOP-MFG-00039 “Clean room and aseptic behavior” was not followed to ensure sterilized components are only contacted with sterile forceps and aseptic manipulations are performed from the side, so as not to disrupt the laminar air flow. For example:

(1) During an investigation to adjust the stopper bowl alignment during aseptic filling of *** of batch *** (US market batch), the operator allowed the *** RABS *** to contact sterile stoppers. These stoppers were subsequently returned to the stopper bowl.

(2) During observation of aseptic filling activities for *** batch *** (US market batch), media fill *** and media fill *** the *** RABS *** were observed to pass over the stopper bowl during assembly, over the stopper bowl and stoppers during change of environmental monitoring plates, and over open vials during removal of fallen vials in the incoming vial area.

Record Date

04/2024

FEI Number

3013712903

Country

India

Citation Type

483

Audit Duration (Days)

7

Investigators

Justin A Boyd & Anastasia M Shields

More observations from same firm / company

Microbiology FDA 483 (Zydus Lifesciences): Established sampling plans and test procedures are not followed

Microbiology FDA 483 (Zydus Lifesciences): Procedures to prevent microbiological contamination did not include adequate validation of the aseptic process

Click here to Download Report form FDA Site
Go to Table
Go to Home
FDA 483 relevant to Microbiology

Disclaimer: The purpose of this article is to provide helpful information on FDA 483s related to microbiological issues. This article represents 483 information in Tabular form for quick access and easy navigation. Information for this article is derived from “Form FDA 483” (Inspectional Observation). This article is not intended to replace the information provided by the FDA, nor is it guaranteed to be complete, always refer official FDA site for details.

More Observations...

Microbiology FDA 483 (Jiangsu Hengrui Pharmceuticals): Container closure systems do not provide adequate protection against foreseeable external factors
Microbiology FDA 483 (Jiangsu Hengrui Pharmceuticals): Procedures designed to prevent microbiological contamination of drug products purporting to be sterile did not include adequate validation of the aseptic and sterilization process
Microbiology FDA 483 (Jubilant Radiopharmacies): The movement of first air in the ISO 5 area is blocked or disrupted
Microbiology FDA 483 (Jubilant Radiopharmacies): Personnel were observed performing aseptic processing outside of an ISO 5 area
Microbiology FDA 483 (Eugia Pharma Specialities): Aseptic processing areas are deficient regarding the system for monitoring environmental conditions
Microbiology FDA 483 (Eugia Pharma Specialities): Aseptic processing areas are deficient regarding the system for cleaning and disinfecting the equipment to produce aseptic conditions
Microbiology FDA 483 (Eugia Pharma Specialities): Separate or defined areas to prevent contamination or mix-ups are deficient regarding the manufacturing and processing operations
Microbiology FDA 483 (Eugia Pharma Specialities): There is a failure to thoroughly review any unexplained discrepancy and the failure of a batch or any of its components to meet any of its specifications whether or not the batch has been already distributed
Microbiology FDA 483 (Eugia Pharma Specialities): Procedures to prevent microbiological contamination did not include adequate validation of the aseptic process
Microbiology FDA 483 (Eugia Pharma Specialities): Procedures to prevent microbiological contamination sterile drug product are not established and followed
Microbiology FDA 483 (Zydus Lifesciences): Appropriate controls are not exercised over computers or related systems
Microbiology FDA 483 (Zydus Lifesciences): Aseptic processing areas are deficient for monitoring environmental conditions
Microbiology FDA 483 (Zydus Lifesciences): Procedures to prevent microbiological contamination are not followed
Microbiology FDA 483 (Zydus Lifesciences): Procedures to prevent microbiological contamination did not include adequate validation of the aseptic process
Microbiology FDA 483 (Zydus Lifesciences): Established sampling plans and test procedures are not followed
Microbiology FDA 483 (Precision Equine LLC): Equipment and utensils are not cleaned, maintained and sanitized at appropriate intervals to prevent malfunctions and contamination
Microbiology FDA 483 (Precision Equine LLC): Procedures to prevent microbiological contamination are not established; written and followed
Microbiology FDA 483 (Precision Equine LLC): No written testing program designed to assess the stability characteristics of drug products
Microbiology FDA 483 (Sun Pharmaceutical): The responsibilities and procedures applicable to the quality control unit are not in writing and fully followed
Microbiology FDA 483 (Sun Pharmaceutical): Equipment and utensils are not cleaned and maintained at appropriate intervals to prevent contamination
Alarm 1 Aseptic Behavior 30 Aseptic Technique 49 Autoclave 1 Biological Indicator 1 Building Maintenance 6 Calibration 1 Clean Room 15 Clean Room Practices 36 Cleaning and Sanitization 29 Cleaning Validation 1 Computerized System 4 Contamination 13 Contemporaneous Verification 1 Data Integrity Issue 10 Disinfectant Efficacy 2 Disinfection 15 Drug Product 1 Endotoxin 1 Environment monitoring 16 Equipment Cleaning 6 Equipment Operation 13 Facilities And Equipment System 13 Facility Design 5 Follow-Up Findings 2 General Cleaning 3 Good documentation Practices 4 Gowning 3 HEPA 4 Hold Time Study 2 HVAC 6 Influx of lesser quality air 1 Investigation 12 Investigation inadequate 5 Investigation incomplete 3 Laboratory Controls 17 Laboratory Practice 16 Maintenance 10 Manufacturing control 9 Media Fill 15 Method Transfer 2 Method Validation 5 Microbial Identification 1 Microbiological Contaminationn 10 No Procedure followed 14 Non-Conformance 1 OOS 5 Personnel Monitoring 3 Procedure 32 Qualification 32 Quality System 33 Risk assessment 6 Service Vendor Audit 1 Smoke studies 14 Specifications 5 Stability Study 2 Sterile Drug Products 5 Sterility Testing 1 sterilizati 2 Sterilization 3 Suitability 1 test procedure 0 Test Procedure (SOP) 10 Trends 1 Usage log 1 Validation 37 Visual Inspection 1 Warehouse 2 Water System 1

Microbiology FDA 483 (Jiangsu Hengrui Pharmceuticals): Container closure systems do not provide adequate protection against foreseeable external factors

Jiangsu Hengrui Pharmceuticals Co., Ltd

Your container closure integrity test for *** Injection (USP) ***mg/***ml is inadequate, The test used empty vials instead of fille vials. Microbial Challenge Study was conducted without a positive control. Dye ingress study was conducted using human eye detection with results "not detected" without specifying the limit of detection,

Microbiology FDA 483 (Jiangsu Hengrui Pharmceuticals): Procedures designed to prevent microbiological contamination of drug products purporting to be sterile did not include adequate validation of the aseptic and sterilization process

Jiangsu Hengrui Pharmceuticals Co., Ltd

Product contact equipment including *** stopper drums, *** were sterilized without outer wrapping and transferred from Grade A cart to Inside of the RABS without cover in Workshop *** Filling Room ***.

Microbiology FDA 483 (Jubilant Radiopharmacies): The movement of first air in the ISO 5 area is blocked or disrupted

Jubilant DraxImage Radiopharmacies Inc.

Specifically, on 03/06/24, during the production of Gozetotide (Illucix) Cold Kit Lot# K-***, your firm's Pharmacy Manager was observed blocking first pass air in the ISO-5 *** flow hood. The following prescriptions were drawn from the cold kit and dispensed: RX*** (13.94 mCi) and RX*** (25.49 mCi).

Microbiology FDA 483 (Jubilant Radiopharmacies): Personnel were observed performing aseptic processing outside of an ISO 5 area

Jubilant DraxImage Radiopharmacies Inc.

Specifically, on 03/06/24, during the production of Gozetotide (Illucix) Cold Kit Lot# K-***, your firm's Pharmacy Manager was observed performing the following aseptic connections in the ISO-7 aseptic processing area: connecting the *** sterile *** to the Gallium Generator and connecting the Sterile *** to the Gallium Generator. The following prescriptions were drawn from the cold kit and dispensed: RX*** (13.94 mCi) and RX*** (25.49 mCi).

Microbiology FDA 483 (Eugia Pharma Specialities): Aseptic processing areas are deficient regarding the system for monitoring environmental conditions

Eugia Pharma Specialities Limited

Surface monitoring of the filling and stoppering machine is not performed in a timely manner following the completion of aseptic filling operations to ensure the data is representative of the environmental conditions at the time of filling. For example:

Microbiology FDA 483 (Eugia Pharma Specialities): Aseptic processing areas are deficient regarding the system for cleaning and disinfecting the equipment to produce aseptic conditions

Eugia Pharma Specialities Limited

On April 29, 2024, *** cleaning wipes packed and ready to be used for *** aseptic cleaning in the Grade A area of the *** Injection *** filling line *** had loose threads and fibers them. The same wipes are also used for *** cleaning in the *** Injection manufacturing line ***. Upon receiving, the wipes are not inspected for the presence of loose threads and fibers.
error: Content is protected !!
Scroll to Top